Machine families we supply
- Filling machines — Liquid and paste fillers — servo, piston and gear-pump — matched to your product viscosity and container.
- Powder filling — Auger and vacuum powder fillers for flour, milk powder, spices and chemical powders.
- Capping machines — Screw, press-on and ROPP capping heads for bottles and jars, inline or monoblock.
- Sealing machines — Continuous band sealers, induction sealers and tube sealing for bags and composite tubes.
- Labeling machines — Flat, round and dual-surface labelers with registration accuracy stated per model.
- Cartoning machines — Vertical and continuous-motion cartoners for blister, bottle and sleeve cartons.
- VFFS machines — Vertical form-fill-seal lines for granules, powders and liquids in film packaging.
- Premade pouch machines — Doypack-style fill-and-seal machines for premade pouches and stand-up bags.
- Shrink wrapping — Sleeve and full-body shrink tunnels for multipacks and transit protection.
- Complete packaging lines — Multi-machine lines engineered around your container, product and target output.
The verification process behind every machine page
- Requirement → machine shortlist — Container, product, fill volume and target speed identify the machine family and 2-3 candidate models.
- Specification verification — Every published figure is checked against the manufacturer parameter table; conflicts are resolved before quoting.
- Supply terms confirmed — Price band, lead time and warranty confirmed with the supplying factory — stated on the machine page.
- Pre-shipment QC and export — Machine inspection before packing, export-grade crating, container loading plan and shipping documents.
Service scope by machine family
These service families describe the information PackHub can structure for a quotation. Project-specific capacity, compliance, lead time and supply terms remain confirmation items until the supplier and buyer approve them.
Filling machine selection
Select liquid, paste, powder or granule filling equipment around product and container constraints.
We map product form, viscosity or particle behaviour, fill volume, container and target output before recommending a filling family.
Scope
- Application fit review
- Specification comparison
- Supplier question list
Confirm before quoting
- Product and container material must be confirmed for every project.
- Contact-part finish and cleanability are quote-confirmed.
- Fill accuracy and repeatability require a product-specific trial.
Buyer question
What should I provide for a filling-machine shortlist? Product form, viscosity or particle size, fill range, container drawing and target output.
Powder filling machine selection
Compare auger and other powder-filling approaches against powder behaviour, dose and container.
Powder flow, bulk density, dust control and dose range determine whether a powder-filling concept is workable.
Scope
- Powder characteristic checklist
- Dose and container review
- Changeover questions
Confirm before quoting
- Powder formulation and contact materials require confirmation.
- Hygiene and finish requirements are project-specific.
- Dose performance must be validated with the actual powder.
Buyer question
Can a catalogue speed be treated as guaranteed output? No. Confirm output with the actual powder, dose and container.
Capping machine selection
Match cap style, neck finish, container and torque requirements to a capping method.
Capping selection starts with closure geometry and torque requirements, then checks container handling, speed and changeover.
Scope
- Closure compatibility review
- Torque and speed questions
- Tooling and changeover checklist
Confirm before quoting
- Cap and container materials must be supplied with the closure drawing.
- Contact and hygienic requirements are quote-confirmed.
- Torque repeatability requires a closure-specific test.
Buyer question
What makes a capping quote comparable? Cap drawing, neck finish, torque window, speed target and change-part scope.
Sealing machine selection
Choose band, induction, tray or tube sealing around package material and seal requirements.
Film, tray, foil, tube and product conditions determine the sealing method and the tests needed before purchase.
Scope
- Package and seal review
- Material compatibility questions
- Seal-test acceptance checklist
Confirm before quoting
- Film, tray, foil or tube construction must be confirmed.
- Seal-surface and contact requirements are application-specific.
- Seal integrity must be verified on the production package.
Buyer question
Do published sealing speeds prove seal quality? No. Speed is conditional on material, temperature and package geometry.
Labeling machine selection
Match label format, container geometry, registration and line integration requirements.
Label dimensions, container shape, application position and line speed define the practical labeling shortlist.
Scope
- Label and container review
- Registration questions
- Integration checklist
Confirm before quoting
- Label stock, adhesive and container surface need confirmation.
- Surface and environmental conditions are project-specific.
- Placement tolerance must be agreed against the actual container.
Buyer question
What should a labeling trial include? The final label stock, filled container, orientation and target speed.
Cartoning machine selection
Compare cartoning concepts against carton format, product handling and line speed.
Carton dimensions, opening style, product presentation and upstream/downstream interfaces drive cartoner selection.
Scope
- Carton format review
- Product handling assessment
- Line interface checklist
Confirm before quoting
- Carton board, closure and product presentation must be confirmed.
- Machine finish and washdown requirements are quote-confirmed.
- Carton and product dimensional tolerances require trial validation.
Buyer question
What blocks a cartoner project most often? Unconfirmed carton drawings, product orientation and line-interface assumptions.
VFFS machine selection
Select a vertical form-fill-seal concept around film, product, bag format and output.
Product flow, film structure, bag dimensions and sealing conditions must be reviewed together rather than as isolated catalogue fields.
Scope
- Film and bag review
- Product dosing interface
- Seal and output questions
Confirm before quoting
- Film structure and product characteristics require confirmation.
- Hygiene and washdown requirements depend on the product.
- Bag dimensions and seal performance require a production-like trial.
Buyer question
Is a VFFS speed rating universal? No. It depends on product, bag size, film and dosing method.
Premade pouch machine selection
Match premade pouch format, filling method, closure and output to the line concept.
Pouch dimensions, zipper or spout features, filling method and presentation determine the machine configuration.
Scope
- Pouch format review
- Filling and sealing interface
- Changeover checklist
Confirm before quoting
- Pouch laminate, zipper, spout and product need confirmation.
- Contact-part and hygiene requirements are project-specific.
- Pouch handling and seal quality require sample trials.
Buyer question
What samples are needed? Final pouch formats, product samples and the target fill and seal conditions.
Shrink-wrapping machine selection
Choose sleeve or full-body shrink equipment around pack format, film and heat constraints.
Pack dimensions, film type, tunnel conditions and desired presentation determine the shrink-wrapping concept.
Scope
- Pack and film review
- Tunnel and heat questions
- Line integration checklist
Confirm before quoting
- Film type and pack construction must be confirmed.
- Machine finish and environment requirements are quote-confirmed.
- Shrink appearance and pack integrity require sample testing.
Buyer question
What must be tested before purchase? Film, pack arrangement, tunnel settings and the finished appearance at target speed.
Packaging line design and integration
Scope interfaces, throughput assumptions and acceptance evidence for a multi-machine line.
Line design starts with product flow, container and pack formats, target output, utilities and the boundary between each machine.
Scope
- Line-layout review
- Interface and utility checklist
- FAT/SAT preparation questions
Confirm before quoting
- Product, package and material-flow assumptions must be documented.
- Hygiene zoning and machine finish depend on the application.
- Line throughput is a system result and needs an agreed test protocol.
Buyer question
What belongs in an integration RFQ? Layout, utilities, interfaces, product and package samples, output target and acceptance criteria.
What you get as a buyer
- A written quotation with the assumptions stated, comparable across suppliers.
- Pre-shipment machine inspection — running video and parameter check before the balance payment.
- Export-grade crating and a container loading plan, handled by PackHub.
- One counterparty for machines, spare parts and shipping documentation.