Sealing Machine
Model ZS-FS80A · Sealing Machine
Last updated: 2026-10
Automatic aluminum-tube line that feeds, orients, fills, folds and seals in one pass: piston dosing is stated at 5–500ml per tube with ≤±0.5% accuracy into Φ10–Φ60mm aluminum tubes at a stated 60–80 tubes/min, with photoelectric registration alignment and no-tube-no-fill detection at 0.55–0.65 MPa.
The ZS-FS80A is an automatic aluminum-tube filling, folding and sealing line stated at 60–80 tubes/min, dosing 5–500 ml per tube with ≤±0.5% accuracy into Φ10–Φ60mm aluminum tubes.
| Filling speed | 60–80 tubes/min |
|---|---|
| Fill range | 5–500 ml/tube (customizable) |
| Container range | Hose Diameter Φ10–Φ60 mm (aluminum tube) |
| Power supply | 220V or 380V / 50Hz; motor 2 kW, heating 3.3 kW |
| Dimensions | 2,500 × 1,200 × 2,400 mm |
| Starting price | $34,999 |
| Construction materials | Aluminum tube |
Technical specifications come from the machine manufacturer's published parameter tables. Price, lead time and warranty are shown here only when confirmed; otherwise request a quote.
Request a quote for current lead time and pricing against your configuration.
Commercial invoice, packing list, bill of lading and the machine's parameter documentation are provided with every export shipment. Machine-specific certificates, when applicable, are stated on the quotation — we list exactly what accompanies your order instead of claiming standard paperwork.
A quotation is prepared from: the machine model (or the product and container to pack), target output, destination country and any documentation your import process requires. Stating these up front keeps the quote comparable across suppliers.
Supply runs through own production plus a vetted outsourcing network, so the catalogue is not capped by one factory's floor. Typical lead times and current production slots are confirmed on the quotation for your configuration — no lead time on this page is a commitment.
Machines ship export-grade crated with a container loading plan. Store crated machines dry and upright, keep the protective film on until installation, and run the first production batch after on-site power and air supply are confirmed.
The stated band covers the machine's mechanical capacity; actual output moves with tube diameter, fill volume and product viscosity, so ask the supplier to run your tube and product and document the measured rate.
These are same-family alternatives, not drop-in equivalents — confirm the selection against your product, container and target output before ordering.
Get scope-stated quotes from verified manufacturer partners.
