Cartoning Machine
Model ZS-CSPM1 · Cartoning Machine
Last updated: 2026-10
End-of-line carton sealing cell combining three machines: the ZS-CF50H erector bottom-tapes cartons up to 450 x 400 x 400 mm at a stated 6-10 boxes/min, the ZS-FXC50 seals tops and bottoms on a 240W drive, and the ZS-FK8001 squares the load and applies edge tape for an H-type finish. Suited to packed shipper cases where a hand-sealed box would not survive the lane, with each station quoted separately on the same page.
The ZS-CSPM1 is a three-machine carton sealing line for packed shippers. The ZS-CF50H erector bottom-tapes cartons up to 450 x 400 x 400 mm at a stated 6-10 boxes/min, the ZS-FXC50 seals top and bottom, and the ZS-FK8001 applies edge tape for an H-type finish.
| Filling speed | 6-10 boxes per minute (ZS-CF50H erector) |
|---|---|
| Container range | Min 250 x 200 x 150 mm, Max 450 x 400 x 400 mm (ZS-CF50H); up to 600 x 500 x 500 mm (ZS-FXC50); tape width 48-75 mm |
| Power supply | 220V / 50Hz (ZS-CF50H), ZS-FXC50: 240W, ZS-FK8001: 1000W; 4-edge sealing (ZS-FK8001), 5-6 kg/cm2 |
| Dimensions | Approx. 2200 x 2050 x 1450 mm (ZS-CF50H) |
| Starting price | $12,999 |
| Machine weight | Approx. 400 kg (ZS-CF50H) |
| Construction materials | Cartons, H-type edge tape finish |
Technical specifications come from the machine manufacturer's published parameter tables. Price, lead time and warranty are shown here only when confirmed; otherwise request a quote.
Request a quote for current lead time and pricing against your configuration.
Commercial invoice, packing list, bill of lading and the machine's parameter documentation are provided with every export shipment. Machine-specific certificates, when applicable, are stated on the quotation — we list exactly what accompanies your order instead of claiming standard paperwork.
A quotation is prepared from: the machine model (or the product and container to pack), target output, destination country and any documentation your import process requires. Stating these up front keeps the quote comparable across suppliers.
Supply runs through own production plus a vetted outsourcing network, so the catalogue is not capped by one factory's floor. Typical lead times and current production slots are confirmed on the quotation for your configuration — no lead time on this page is a commitment.
Machines ship export-grade crated with a container loading plan. Store crated machines dry and upright, keep the protective film on until installation, and run the first production batch after on-site power and air supply are confirmed.
The page states the line erects cartons, applies bottom tape, seals the top, squares the carton and applies edge tape, so the finished H-pattern resists reopening in transit.
These are same-family alternatives, not drop-in equivalents — confirm the selection against your product, container and target output before ordering.
Get scope-stated quotes from verified manufacturer partners.
