Sealing Machine
Model ZS-AFK400 · Sealing Machine
Last updated: 2026-10
Semi-automatic bench-top vacuum can seamer with nitrogen flushing, stated at 4–6 cans/min: vacuum and vacuum-plus-nitrogen dual modes hold residual oxygen below 3%, 1-pair seam rolls close 30–150 mm diameter cans 50–180 mm tall, and a dual-button start guards the 750 × 1030 × 1700 mm, 200 kg chamber body.
The ZS-AFK400 is a semi-automatic bench-top vacuum can seamer with nitrogen flushing, stated at 4-6 cans/min, holding residual oxygen below 3% on 30-150 mm diameter cans 50-180 mm tall.
| Filling speed | Sealing Speed: 4–6 cans/min |
|---|---|
| Container range | Sealing Diameter: 30–150 mm; Sealing Height: 50–180 mm (adjustable) |
| Power supply | Voltage: 220 V, 50/60 Hz; Power: 2 kW |
| Dimensions | 750 × 1030 × 1700 mm |
| Starting price | $5,850 |
| Machine weight | 200 kg |
| Construction materials | 440C steel sealing system |
Technical specifications come from the machine manufacturer's published parameter tables. Price, lead time and warranty are shown here only when confirmed; otherwise request a quote.
Request a quote for current lead time and pricing against your configuration.
Commercial invoice, packing list, bill of lading and the machine's parameter documentation are provided with every export shipment. Machine-specific certificates, when applicable, are stated on the quotation — we list exactly what accompanies your order instead of claiming standard paperwork.
A quotation is prepared from: the machine model (or the product and container to pack), target output, destination country and any documentation your import process requires. Stating these up front keeps the quote comparable across suppliers.
Supply runs through own production plus a vetted outsourcing network, so the catalogue is not capped by one factory's floor. Typical lead times and current production slots are confirmed on the quotation for your configuration — no lead time on this page is a commitment.
Machines ship export-grade crated with a container loading plan. Store crated machines dry and upright, keep the protective film on until installation, and run the first production batch after on-site power and air supply are confirmed.
Vacuum level, nitrogen flush volume and your can's headspace all move the measured oxygen figure, so ask the supplier to run your actual can and document the measured value and gas settings used.
These are same-family alternatives, not drop-in equivalents — confirm the selection against your product, container and target output before ordering.
Get scope-stated quotes from verified manufacturer partners.
